热处理论坛

 找回密码
 免费注册

QQ登录

只需一步,快速开始

北京中仪天信科技有限公司 江苏东方航天校准检测有限公司 热处理论坛合作伙伴广告位
搜索
查看: 19350|回复: 8

[Discussion] SAT

[复制链接]

签到天数: 96 天

[LV.6]常住居民II

发表于 2018-1-30 14:54:29 | 显示全部楼层 |阅读模式
北京中仪天信科技有限公司
Dear All

Would you like to introduce your SAT? What's the condition for SAT? Especially for the Gas furnaces?

Since generally it is not stable for gas furnaces even during the soaking time. Then how do your perform the SAT?

Thanks very much.

BRs
Lucy

评分

参与人数 1热处理币 +10 收起 理由
cjzhou + 10 感谢参与!

查看全部评分

签到天数: 1135 天

[LV.10]以坛为家III

发表于 2018-2-6 13:13:28 | 显示全部楼层
perASTM 2750 and/or CQI-9

评分

参与人数 1热处理币 +10 收起 理由
cjzhou + 10 感谢参与!

查看全部评分

回复 支持 反对

使用道具 举报

签到天数: 1135 天

[LV.10]以坛为家III

发表于 2018-2-12 18:58:59 | 显示全部楼层
shihuan211152 发表于 2018-2-6 13:13
perASTM 2750 and/or CQI-9

Thanks for your encouragement our
回复 支持 反对

使用道具 举报

签到天数: 303 天

[LV.8]以坛为家I

发表于 2018-2-24 14:45:32 | 显示全部楼层
According to the AMS-2750, 3 ways could be used to perform SAT.
1.  Conventional SAT, this requirement involves temperature comparison between equipment temperature measurement system and calibration system. For gas furnace,to eliminate the effect of gas flow on temperature sensor, we recommended use Double-element thermocouple(双芯热电偶), of which one can be used as the equipment sensor and the other as test sensor. However, there are additional requirement for the type of the thermocouples used.

2. Alternate SAT. this method involves calibrate the equipment sensor and remain system(the combination of connector, wire, instrument) individually and calculate the SAT error algebraically. This method do not requires a real ramp up on furnace but have special requirement on the replacement of sensors.

3. SAT Waiver. We do not recommend this method.

评分

参与人数 1热处理币 +18 收起 理由
cjzhou + 18 感谢应助!

查看全部评分

回复 支持 反对

使用道具 举报

签到天数: 96 天

[LV.6]常住居民II

 楼主| 发表于 2018-2-27 09:02:54 | 显示全部楼层
magicmotor 发表于 2018-2-24 14:45
According to the AMS-2750, 3 ways could be used to perform SAT.
1.  Conventional SAT, this requirem ...

Dear magicmotor

Thanks very much for your experienced explanation.

I am very interested in the method 1 you introduced and we do have the problem that didn't find a better way to eliminate the effect of gas flow on temperature sensor. Because of this impact , we can't get stable readings even during soaking time. In the end we shut off all the burners but you know the temperature will drop down.

Is your furnace heated by open flame directly?

Thanks very much.

评分

参与人数 1热处理币 +5 收起 理由
cjzhou + 5 感谢参与!

查看全部评分

回复 支持 反对

使用道具 举报

签到天数: 1537 天

[LV.Master]伴坛终老

发表于 2018-3-1 11:04:36 | 显示全部楼层
LucySun 发表于 2018-2-27 09:02
Dear magicmotor

Thanks very much for your experienced explanation.

Dear Lucysun

If you interete in the method 1 ,espicial the Double-element thermocouple。
Perform an SAT folllowing AMS2750e 3.4.6.If you use the Double-element thermocouple,it means resident SAT thermocouple.
See 3.4.5.2.1,it  hase limitation that resident SAT sensor type shall be different from the senor be tested.
Both type N sensor can not be allowed on figure 5.

评分

参与人数 1热处理币 +18 收起 理由
cjzhou + 18 感谢应助!

查看全部评分

回复 支持 反对

使用道具 举报

签到天数: 20 天

[LV.4]偶尔看看III

发表于 2018-10-17 14:51:52 | 显示全部楼层
For fas furnace SAT test, it shall also be stable if you follow the specification. Or you shall ask some expert to check the cycle system.

Our furnace is 40m long and 3m wide and 3m high. For SAT test, all the 48 control thermocouples are qualified.

评分

参与人数 1热处理币 +20 贡献值 +50 收起 理由
cjzhou + 20 + 50 感谢参与!

查看全部评分

回复 支持 反对

使用道具 举报

签到天数: 55 天

[LV.5]常住居民I

发表于 2018-12-12 08:38:40 | 显示全部楼层
According to the CQI-9 , our equipment needs to be tested SAT, and the gas furnace test frequency is once every two weeks.
Due to the particularity of the atmosphere furnace, ensuring the accuracy of the temperature control, the thermocouple in the furnace must be a Double-element thermocouple;
At present, the stability of our equipment in the SAT test is still possible.

评分

参与人数 1热处理币 +20 贡献值 +50 收起 理由
cjzhou + 20 + 50 感谢参与!

查看全部评分

回复 支持 反对

使用道具 举报

您需要登录后才可以回帖 登录 | 免费注册

本版积分规则

QQ|Archiver|手机版|小黑屋|热处理论坛 ( 苏ICP备2021037530号|苏公网安备32059002001695号 )
Copyright © 2005-2023, rclbbs.com 苏州热协网络技术有限公司 版权所有

GMT+8, 2024-3-29 07:04 , Processed in 0.051942 second(s), 30 queries .

Powered by Discuz! X3.4

Copyright © 2001-2021, Tencent Cloud.

快速回复 返回顶部 返回列表