25Cr Alloyed cast iron.
~778; ~852 As-quenched : Untempered martensite matrixis difficult to
etch / tint and appears brighter than the matrix that is tempered .
~780Tempered: matrix easy to etch / tint, so the matrix appears to be darker.
Also, A large number of carbide particles precipitated from matrix. 本帖最后由 leomet 于 2012-9-30 17:27 编辑
Make good use of my posts to enhance your metallurgy knowledge and your income in the future. 本帖最后由 leomet 于 2011-5-4 05:30 编辑
Drum Stick AISI 4135 Q/T 本帖最后由 leomet 于 2012-9-30 17:29 编辑
For your eyes only. 007電影 有一集片名
25Cr alloy white cast iron
Carbide tinted pink. 25Cr alloy white cast iron, as-cast.
Carbide in the matrix of Austenite.
Austenite tinted pink. 本帖最后由 leomet 于 2010-12-15 09:11 编辑
25Cr alloy white cast iron 回复 217# leomet
Dear Professor Wu, I completely agree with that German expert's appraisal to your work! Maybe you can leave a contact message in case someone can make business cooperation with you?
Thanks a lot!
JW Yu
william_sh@sina.cn Perfect job, it is an artwork.
Pay great respect to you and your work. 回复 323# leomet
Photos you seldom see.
AISI 4140, cold forged part.
Recrystalized at ~600C for 30+ min
Note the subgrains in big grains. 回复 30# leomet
为什么有时候境界上析出的白色物质这张上是铁素体,而前面有张照片上说是渗碳体?
我想请教一下,是您通过什么判断的?使用了别的测试方法确定的?谢谢
ADI
本帖最后由 leomet 于 2012-9-30 17:33 编辑回复 328# leomet
Art work from one of the best metallurgists from Taiwan.
Ductile IronAustempered at 350C
Today, 12/31, the last day of 2010, obtained by chance, this wonderful tintingrevealsdetails of graphite nodules.
These graphite nodules look somewhat like the cross section of "Swiss rolls", don't they? 瑞士卷
I am pretty much satisfied with these photos and hope you guys enjoy seeing these photos as well. 回复 329# lxialee
I don't answer questions here mostly. Please reviewyour textbooks. 本帖最后由 leomet 于 2011-10-22 06:16 编辑
回复 330# leomet
Same specimen asF 291. Nital etched, prior to tinting. 本帖最后由 leomet 于 2011-1-1 18:32 编辑
Dear friends,
上傳很花時間, 我事情很多, 沒時間再在其他論壇展示. 你可連結到此論壇欣賞. 本帖最后由 leomet 于 2011-6-1 03:41 编辑
回复 333# leomet
ADIcolor etched again.
Austempered台灣叫"沃斯回火" 本帖最后由 leomet 于 2011-5-4 05:26 编辑
回复 337# leomet
P3,Cast+ Normalized + Q.T.
To be used for injection mold and die. 本帖最后由 leomet 于 2011-4-9 08:42 编辑
回复 338# leomet
P3, 鍛塊.
1 區: 高碳M+殘A Solute-rich
2 區: Martensite
3區: M + 微量Ferrite Solute-poor 本帖最后由 leomet 于 2011-3-1 21:35 编辑
TheseADI photos are really feast to my eyes.
Hope they are so to your eyes too. 感谢!感谢!感谢!
我一直想看到一些晶界复熔三角或复熔球的照片不知老师能否指点一二?谢谢
H13, 原材料
本帖最后由 leomet 于 2011-6-1 03:37 编辑H13, 原材料, Distribution of carbide particles is NOT so good.
~188, ~190Carbide tinted.
~216, ~218,Ferrite tinted, carbide remained white.